Duratrax Nitro Evader Buggy is a 1/10 scale glow powered, radio controlled off road
buggy that's Ready-to-Run. This is a complete package! Fully assembled, painted,
includes fuel bottle, glo-igniter, instructions, more
The only thing you need to purchase is the fuel.
FEATURES: Chassis: Anodized 7075 T-6 aluminum Drive: Rear Wheel
Drive Radio: 2 channel Futaba pistol grip AM 27mHz with steering and
throttle trims, adjustable steering rate, servo reversing, charging
jack for optional NiCds (not included) Engine: .18 (3.0cc) Duratrax
pull-start with rotary carburetor and glow plug Exhaust: Tuned pipe
w/header Fuel Tank: 75cc (2.53oz) flip top cap Clutch: Hard anodized
slipper type Transmission: Single speed Ball Bearings: Complete set,
16 total Shocks: Four oil-filled, aluminum body with coil-over spring
Main Gear: 56 tooth plastic Gearbox: Rear, sealed Differentials:
Adjustable ball type Brakes: Single composite disk Tires: Rear pin and
front ribbed Wheels: White dish type Body: Painted polycarbonate with
decals applied, see COMMENTS Suspension: Fully adjustable Camber Tie
Rods: Fully adjustable Steering Tie Rods: Fully adjustable Steering:
Bell crank type Servo Saver: Included Warranty Period: One Year on all
Stress-Tech parts, 90 days for all other parts.
INCLUDES: One 1/10 scale ready-to-run Nitro Evader BX off-road
buggy with, oil filled aluminum body shocks, pistol grip AM radio, .18
cu in (3.0cc engine with tuned pipe, glow plug, painted body, glow
starter with battery, 8oz (250cc) fuel bottle, engine start-up video,
and 12 AA batteries
REQUIRES: Fuel: 2-cycle glow fuel with 10%-15% nitro methane, 16%
lubricant
SPECS: Vehicle- Length with wing: 16.5" (421mm) Width: 10.25"
(260mm) Height: 4.5" (115mm) Weight: 3lbs 13.5oz (1743g) approx.
Wheelbase: 11" (281mm) wheels on-center front-to-rear Tread- Front-
9-5/8" Rear-10-1/8" wheels on-center side-to-side Ground Clearance:
1.1" (27mm) Gear Ratio: 3.29:1 Tires- Front: 1" x 2.2" (25x55mm) Rear:
1.2" x 2.2" (30x55mm) Body- Length: 13-3/4" (349mm) Width: 6-3/4"
(171mm) Height: 1-5/8" (41mm) |
