Hobbico SuperStar EP RTF (ready to fly) with ailerons.
  One of the most "modeler-friendly" trainers in the industry.

Construction: Balsa and plywood Covering: Precovered in a durable plastic film. Building Time: Ready to fly in just 3-5 hours. Radio Compartment: Plywood reinforced, allows for easy installation of standard-sized onboard electronics Wing: One piece with ailerons and metal joiner rod Airfoil: Flat-bottom airfoil supplies excellent lift at slow speeds and also helps keep the model level Landing Gear: Two piece pre-bent wire 0.098" (2.5mm) in diameter Wheels: Two 1-3/4" (45mm) diameter foam construction Propeller: 9x5.5, composite construction Speed Control: Electronic, with metal heat sink, BEC (battery eliminator circuitry) and Kyosho type connector, motor limit rating and other specs not supplied Radio: Futaba 4YF Motor: Electrifly T-601 preinstalled with leads Battery: 7-cell 8.4V 2100 mAh Warranty: Ninety day limited

INCLUDES: One SuperStar EP ARF airplane with ailerons, battery, landing gear with wheels, motor, pushrods, ailerons, instruction manual and Futaba 4YF radio system

REQUIRES: Charger: Timed or peak for included battery

SPECS: Wingspan: 48.75" (1240mm) Wing Area: 402 sq in. (26.dm) Weight: 3.1lb (1.4kg) ready to fly Wing Loading: 18oz/sq ft (54.9g/dm) Length: 36.1" (917mm)