This is the radio controlled, electric powered,
    Great Planes Slinger Almost-Ready-to-Fly expanded foam flying wing kit
                For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Expanded foam, rip, bend, and break resistant Wings: One piece foam with ABS plastic winglets to add stability covered in heat shrink film Motor: Speed 400 size with prop Radio compartment: concealed underneath ABS center section Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

INCLUDES: Speed 400 motor with two props, two wing halves, center section, canopy, Velcro tape strip, pushrods with tubes, wing fins, decals, control horns, battery connector, photo-illustrated instructions, nylon tie strap, wing tape, and center section tape.

REQUIRES: Battery: 8 cell, 1800mAh (GPMA2431) Charger: GPMM3001 or GPMM3150 **to use either charger, adapters will need to be made. See Completion Guide for details** Radio: 3 or 4 channel w/electronic mixing(or optional mixer GPMA24288) Servos: 2 mini or micro (min. of 15 oz-in of torque) Speed Control: 15amp electronic (GPMA2429) Glue: 6 minute epoxy (GPMR6042) Misc. Items: Building and field equipment

SPECS: Wingspan: 47.4" (1204mm) Wing Area: 462.8sq in (29.85sq dm) Weight: 27oz (765g) Wing Loading: 8.4 oz/sq ft (25.6 g/sq dm) Center of Gravity: 8" (203mm) Back from front tip of plane inverted

Control Throws: Low Rate High Rate Elevator, up and down: 3/8" (10mm) 1/2" (13mm) Ailerons, up and down: 1/2" (13mm) 3/4" (19mm)