| Wing Span: 38.75 in
(985mm) |
| Overall Length: 34 in
(865mm) |
| Wing Area: 325 sq in (21
sq dm) |
| Flying Weight: 22 - 25
oz (625 - 710g) |
| Motor Size: Park 400
Inrunner or Park 450 Outrunner |
| Radio: 4-channel or
greater (7-channel for quad flaps) |
| Servos: 4 sub-micros (6
sub-micros for quad flaps) |
| Trim Scheme Colors: UltraCote
Fluourescent Blue, Flame Red, Transparent Red &
White |
| CG (center of gravity): 2.25
in (57mm) behind the leading edge |
| Prop Size: 10x7 - 11x7 |
| Hardware Included: Yes |
| Speed Control : 20A
Brushless |
| Recommended Battery: 2100
mAh 3-Cell 11.1V Li-Po |
| Flaps: Yes (optional) |
| Control Throw (Ailerons): 1/2
in (15mm) Up/Down Low Rate or 5/8 in (19mm) High
Rate |
| Control Throw (Elevator): 9/16
in (18mm) Up/Down Low Rate or 7/8 in (23mm) High
Rate |
| Control Throw (Rudder): 7/8
in (23mm) Right/Left Low Rate or 1-1/4 in (32mm)
High Rate |
| Approx. Flying Duration: 10-20
minutes |
| Scale: Park Flyer |
| Approx. Assembly Time: 1-2
hours |
| Gear Ratio: 6.5:1 when
using Park 400 Brushless Inrunner |
