Hitec HFX-R Reversible Electronic Speed Controller.
Works for any electric car or truck using a motor with at least 10 turns.
FEATURES: Hitec Electronic Speed
Controller, one Push button Set-up. Brake function
Reverse lockout MOSFET drive. Low resistance. White
standard Tamiya battery connector. Servo plug works
with, Hitec, Futaba, JR, Airtronics Z only. Yellow
(+) and blue (-) wire with bullet connectors. Three
blue five-fin, heatsinks.
INCLUDES: One Hitec Electronic
Speed Controller Instructions
REQUIRES: Installing in vehicle
SPECS: Length: 1.6 x 1.3 x 1.1
inches (41 x 34 x 28mm) Operating voltage: 6-7 cells
BEC output voltage: 5V BEC output current: 1A Max.
output: 648A Continous current: 162A Rated Current
Brake/Rev: 80A On Resistance Forward: 0.004 ohm On
Resistance Reverse: 0.008 ohm Weight: 59g (1.97oz)
Tempature overload: 100-110 degrees Celsius Motor
limit: 10-turn forward only When properly geared can
use a 12 turn motor if you using reverse
COMMENTS: Speed controller can be
set-up as a foward only speed controller for racing.
|
