| Unlike other boxes that can take a
couple of hours to assemble, the Ready-Start comes prebuilt and
wired. All that's needed is to plug in and install the batteries
(not included), attach the chassis positioning posts in the
desired position, and plug in the rubber feet. The Ready-Start
is ready to use in about 5 minutes. Dynamite's Ready-Start comes
with the starter wheel positioned for sidewinder mount engines
to fit most 1/10 and 1/8 scale cars but can easily be positioned
inline for 1/8 scale buggies in a few minutes with just four
screws.
Smart features
The Ready-Start has several unique features. A 3-plug glow plug
caddy and body clip holder is conveniently located on the front
of the box just below the handle. No more fumbling to find these
items, just before a race. The two 550 high-torque motors (tied
together through a belt-reduction drive unit) have internal
capacitors attached. This eliminates the radio interference that
we've experienced with other starter boxes. You'd certainly
never run your electric car without capacitors on the motor.
The Ready-Start also features several added slot positions
for mounting the chassis positioning posts that will fit
virtually every popular 1/10 and 1/8 gas car or truck. Two types
of batteries can be used: a single 12-volt, 7amp lead acid
battery or two 7.2-volt car packs. Wiring harnesses are provided
to accept both.
It provides plenty of power for even stubborn .21 engines. If
you're in the market for a new starter box with a difference,
then pick up Dynamite's new Ready-Start. It's a smart way to get
started! |
